News:

Forum may be experiencing issues.

Main Menu

Pic of Ego Driver wiring footswitch to newest board?

Started by rydog2223, April 13, 2013, 06:36:52 PM

Previous topic - Next topic

rydog2223

Hello.:)  First Madbean build and things are going smooth.;)  Hey I am on one hangup.  I have the newest version of the board and I am a bit confused to some of the lug wiring to the PCB.  1A lug in question and a couple of others.  Can someone show a completed pic of their build showing the wiring.  Sorry if this has been discussed.  I did a quick search and could not find any.  A lot of the pics were for the old board.  Thanks so much in advance!



madbean

For footswitch wiring, the standard diagram is what I use: http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf

Let me know if you need any more help.

rydog2223

Quote from: madbean on April 13, 2013, 07:49:12 PM
For footswitch wiring, the standard diagram is what I use: http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf

Let me know if you need any more help.

Thanks so much for the reply!  I will go over this and see where I went wrong.  The LED came on but does not go off...:D  Thanks again and I will report back one way or the other.:)

rydog2223

Also... If not using the 2nd clipping mod.  Do you leave the holes on the PCB open or do you have to jumper them?  Thanks!

rydog2223