Topics

DBA Space Bender, I keep youtubing this pedal. No doubt it's probably  fancy on the inside. Something similar? A chorusy/flangy delayish that can also scramble eggs?

2019 Aquaboy DLX - My new fav delay! Calibrated for a lil over 700ms, starts to degrade  after 550,  set up for self oscillation. I luv the triangle modulation. Finished with experimental hydro dipping.

Man o War, calibrated at a lil over 500ms and on the verge of oscillation. It has a 7815 wired between the jack and PCB, bolted to the inside for a heatsink. I run it off an 18V supply, down to 15V, then 12V on the board. Finished with some experimental hydro dipping that continues on the back. Cleaner sounding analog delay, I really like it.

Would an xvive VTL5C3 work with the Aquaboy DLX? Having trouble sourcing 9203 LDRs.

Don't know if this has already been addressed.

Populating my Glasshole Rev 1 PCB and noticed a possible error in the document page 15 Q1 to VC fix.

The fix shows a jumper to R46, however on my pcb that is R42, which connects to pin 2 of the Rate pot. R46 is on the other side of T2 Trimm pot. Verified continuity test with DMM.

Will this switch fit the Glasshole? Smallbear doesn't appear to be taking orders.

https://www.pedalpcb.com/product/mini-rotary-switch-2p4t/

My Man o War is assembled, just need 2 MN3101's, anyone know a source other than Banzai? They are sod out.

Hi, I ordered a ManOWar pcb,  the build document says it can use a 125B or a 1590BB. Is the drill template is for a 1590BB? Also will xvive 3005 ic's work with this circuit?