Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - harryklippton

Pages: 1 [2] 3 4 ... 35
16
Build Reports / Re: Procrastinator - Boss SG-1 Slow Gear
« on: February 14, 2023, 02:42:37 PM »
That came out great, I'm diggin it

17
Build Reports / Re: Heliodor-Boss.OD-3
« on: February 07, 2023, 10:09:38 AM »
That looks fantastic. All that yellow is really striking too

18
General Questions / Re: El Guapo fuzz and transistors
« on: February 05, 2023, 09:25:12 AM »
I only bought the 2N3565 because they were available and look cute, but I'd put whatever transistors are of a favorable hfe value in instead.  I don't know anything about this circuit  either 🤷

19
General Questions / El Guapo fuzz and transistors
« on: February 04, 2023, 11:28:39 PM »
I'm working on an old board for the El Guapo fuzz. I bought 2 2N3565 transistors and decided to check their HFE before soldering them in. I found that they're wildly different. One was about 500 and the other one was maybe 290ish. Any recommendations on which I should put in Q1 and Q2?

20
Open Discussion / Re: Pedal photo booth
« on: January 31, 2023, 10:38:41 PM »
I know how well this works because your photos always look amazing

21
Build Reports / Re: High Noon (Man O' War) Delay #2
« on: January 30, 2023, 05:32:06 PM »
Excellent build and thanks for the story

22
Open Discussion / Re: What's worth buying from the big A?
« on: January 30, 2023, 01:41:20 PM »
Oh I'm still working through two boxes of mlcc assortments that I bought like 5 years ago and they've been fine

23
Open Discussion / Re: What's worth buying from the big A?
« on: January 30, 2023, 12:30:59 PM »
I just received a little hot plate and some low temp solder paste as an alternative to hand soldering surface mount stuff. The plate was $13. I also buy lead-removal cleaning wipes that I use for my hands after soldering. So not components per se but peripheral stuff
LMK how the solder paste goes! I need to pick some up for some SMD stuff I want to try. No problem hand soldering it, but it would save me hours in this case lol

Sure thing. I just wabted to try something different. I did notice that the solder paste says it should be refrigerated and I'm definitely not doing that so we'll see I guess

24
Open Discussion / Re: What's worth buying from the big A?
« on: January 30, 2023, 12:25:24 PM »
I just received a little hot plate and some low temp solder paste as an alternative to hand soldering surface mount stuff. The plate was $13. I also buy lead-removal cleaning wipes that I use for my hands after soldering. So not components per se but peripheral stuff

25
General Questions / Re: 3 Quick Q's about the Setback Delay
« on: January 29, 2023, 07:05:48 PM »
Cool video. I really enjoyed that

26
Build Reports / Re: Legend - BOSS CE-1 clone
« on: January 22, 2023, 07:12:59 PM »
🤔🤔🤔🤔🤔🤔🧐

27
General Questions / Re: Dreamtime question
« on: January 22, 2023, 09:25:13 AM »
Thanks Brian! I'm gonna blast a 10n in there. I doubt I have a 680R in 1/8w so I'll just roll with it

28
General Questions / Dreamtime question
« on: January 22, 2023, 08:55:47 AM »
Hey y'all I'm finally getting around to building a Dreamtime and it turns out I don't have an 8.2nf cap. Is there another value I could use, like 10nf, or should I just wait to order the right value?

Looks like it's in the audio path coming out of the fv-1 into the TL074. Is it part of a high pass filter, or something else? Sorry if my questions are dumb. Dumb questions lead to important questions and I'm just a little bird trying to jump out of the nest

29
Build Reports / Re: DeadRinger 2022
« on: January 21, 2023, 08:10:00 PM »
I've had that happen more times than I'd like to admit. I feel your pain Gordo

30
Open Discussion / Re: Here we go again: David Crosby this time
« on: January 19, 2023, 11:05:20 PM »
I listen to the Byrds basically every day. Thanks for those sweet vocal harmonies.

Pages: 1 [2] 3 4 ... 35