1
Open Discussion / Re: Returning to the fold…
« on: July 26, 2023, 06:25:24 PM »
Greetings fellow stay-at-home dad!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Global Annoucements / Re: Shipping delay
« on: June 15, 2023, 08:54:14 PM »
Glad you're (relatively) ok! Wishing you a speedy recovery
3
Build Reports / Re: BC Fuzz
« on: April 23, 2023, 06:05:06 PM »
That is super freakin tidy my guy. Excellent work
4
Build Reports / Re: ZION | Effects Layouts Sonorus
« on: April 18, 2023, 08:31:12 PM »
Oh SHIT that looks cool 😍 I haven't been to Zion but I spent a week each in arches and canyonlands a little over 10 years ago after reading desert solitaire
5
Tech Help - Projects Page / Re: Business Card Fuzz (BCF) Failure/Help
« on: April 15, 2023, 08:20:05 PM »
The solder joints on the footswitch don't look great. You can reflow them by putting your soldering iron back on them and waiting til you see the solder liquify. Be sure to touch the iron top to the pad on the board and the lug of the switch at the same time
6
Open Discussion / Re: The reason why we still call it "125B"
« on: April 15, 2023, 06:29:20 PM »
As much as I dislike "1590N1," I was ready to just start calling it that if it was Mammoth's fault
7
Build Reports / Re: Sardine Tin Plus
« on: April 11, 2023, 06:55:35 AM »
Ooooh that's looking good
8
Global Annoucements / Re: April releases available: two compressors, one distortion
« on: April 05, 2023, 06:18:02 AM »
If you’re on a comp kick and thinking of doing another small board as a giveaway maybe you should do Mictester’s Really Cheap Compressor. Built one on a whim a while back and it is shockingly good on my twelve string electric.
Interest piqued
9
Open Discussion / Re: Tube ban
« on: March 28, 2023, 04:42:27 PM »
https://www.wired.com/story/one-mans-quest-to-revive-the-great-american-vacuum-tube/
"He says he aims to launch Western Electric’s 12AX7, America’s first new tube in decades, this summer. After that he plans to add a string of additional models, versions of the 6L6, EL34, EL84 12 AT7, and 6V6 tubes—a lineup he calculates makes up almost 80 percent of the relevant music equipment, such as guitar and studio amps. If all goes to plan, the US could once again dominate vacuum tube manufacturing."
I was just wondering what happened with this the other day. Thanks for the link
10
Tech Help - Projects Page / Re: SOLVED Total Recall help needed please!
« on: March 23, 2023, 03:19:24 PM »Thanks for reaching out. I literally just solved it with some help from some fine fellows!That’s the second time I’ve seen that in this build in the last week.
I think it turned out to be a faulty voltage reg. I changed the, R57 and also the trim pot for Bias 2 and its working like a dream now.
Thanks to all those involved.
Sent from my iPhone using Tapatalk
That's cuz it's the same guy 🤣
11
Build Reports / Re: Nordic Metal
« on: March 14, 2023, 04:12:05 PM »Have to say it's Hela awesome! Well done.
There you go again
12
Build Reports / Re: Echo Fuzz - MB Splunker
« on: March 13, 2023, 07:27:22 PM »
Love that color enclosure. This came out great
13
Build Reports / Re: Degenerator - MBP
« on: February 27, 2023, 03:23:35 PM »
This looks excellent, I'm really digging it. And you nailed it on the photo quality too. Cool build
14
Build Reports / Re: Archibald
« on: February 23, 2023, 07:12:11 PM »
Nice work. Taking a step up on a new project is the best!
15
Build Reports / Re: The Grodiest Odor | [ODR-1-like b/w Boost]
« on: February 22, 2023, 07:02:42 AM »
How can I not like this? It says ass control