News:

Forum may be experiencing issues.

Main Menu

OD->Boost and Boost->OD switch

Started by helos, May 02, 2019, 05:32:18 PM

Previous topic - Next topic

helos

Hi guys! I'm sure you can help... I'm trying to design a pedal with an overdrive and a boost, each one with their switch.

But I'd like to add a toogle switch to choose the position of the boost (before or after the drive), much like the Fulltone Fulldrive 3...

Do you have a schematic for something like this??

Can someone help me?  :-[

Thanks

Aentons

Quote from: helos on May 02, 2019, 05:32:18 PM
Hi guys! I'm sure you can help... I'm trying to design a pedal with an overdrive and a boost, each one with their switch.

But I'd like to add a toogle switch to choose the position of the boost (before or after the drive), much like the Fulltone Fulldrive 3...

Do you have a schematic for something like this??

Can someone help me?  :-[

Thanks

You are just talking about switching the order of the effects. Try and Google "Order Switch" or "series order switching"

Aentons


helos

Quote from: Aentons on May 02, 2019, 05:48:59 PM
Here is one I had saved

Awsome!! Thanks! So basically I should use a 4pdt toogle switch right?


Aentons

#5
Nope, sorry, that first one was probably confusing.

This should work better



http://www.geofex.com/article_folders/fxswitchr/fxswitchr.htm

Timko

Quote from: dan.schumaker on May 02, 2019, 06:52:31 PM
You can also get by with a 3PDT


I've used this one before on a few builds!

m-Kresol

Quote from: Aentons on May 02, 2019, 05:48:59 PM
Here is one I had saved

This is one is mine. It uses a 4PDT because it has a send-return in the middle with switched jacks. This way you can put other effects in between and still switch the order. if you don't want to use this, you're better off with a 3pdt.
I build pedals to hide my lousy playing.

My projects are labeled Quantum Effects. My shared OSH park projects: https://oshpark.com/profiles/m-Kresol
My build docs and tutorials