News:

Forum may be experiencing issues.

Main Menu

DIY Minimoog!

Started by monkeyssj1, May 11, 2015, 03:43:56 PM

Previous topic - Next topic

nimm

Quote from: monkeyssj1 on May 14, 2015, 03:12:43 PM
Quote from: nimm on May 14, 2015, 02:48:48 PM
Thanks guys about the calibration information after it's built.  I think I may have to wet my feet with one of the Mutable Instruments Ambika's or Shruthi's before tackling this.  I wouldn't have know about those synths without seeing this thread.  I know MI doesn't make those anymore but a couple places do sell the boards.
Cool stuff

Nimm could you post your findings for shruthi boards?? I would love one of those fellas sometime in the future.

I apologize if this is detracting too much from the original Minimoog topic but here are the requested links.
MI still has a Shruthi kit:  http://shop.mutable-instruments.net/products/shruthi-1-kit

This site has boards for both synths (US supplier):  http://www.laurentidesynthworks.net/


JakeFuzz

Quote from: monkeyssj1 on May 14, 2015, 11:03:07 AM
Paul i'm somewhat interested in your enclosure as well :). Please let me know updates/if you plan on being down to do some for others (enclosure/faceplace or even just faceplate.)

Ill maybe start a new thread in misc. diy when I get this thing going. I am not sure how economical it would be to source out the enclosure. I am literally just buying a Hammond box and drilling holes in it. The faceplate I am just drawing up in inkscape and sending to a laser engraving company who does the engraving and punching.

lincolnic

Quote from: JakeFuzz on May 14, 2015, 06:07:35 PM
Quote from: monkeyssj1 on May 14, 2015, 11:03:07 AM
Paul i'm somewhat interested in your enclosure as well :). Please let me know updates/if you plan on being down to do some for others (enclosure/faceplace or even just faceplate.)

Ill maybe start a new thread in misc. diy when I get this thing going. I am not sure how economical it would be to source out the enclosure. I am literally just buying a Hammond box and drilling holes in it. The faceplate I am just drawing up in inkscape and sending to a laser engraving company who does the engraving and punching.

Might be interested in that faceplate as well. Keep us posted.

peAk

Quote from: lincolnic on May 15, 2015, 04:01:35 AM
Quote from: JakeFuzz on May 14, 2015, 06:07:35 PM
Quote from: monkeyssj1 on May 14, 2015, 11:03:07 AM
Paul i'm somewhat interested in your enclosure as well :). Please let me know updates/if you plan on being down to do some for others (enclosure/faceplace or even just faceplate.)

Ill maybe start a new thread in misc. diy when I get this thing going. I am not sure how economical it would be to source out the enclosure. I am literally just buying a Hammond box and drilling holes in it. The faceplate I am just drawing up in inkscape and sending to a laser engraving company who does the engraving and punching.

Might be interested in that faceplate as well. Keep us posted.

+1

monkeyssj1

Quote from: nimm on May 14, 2015, 04:21:26 PM
Quote from: monkeyssj1 on May 14, 2015, 03:12:43 PM
Quote from: nimm on May 14, 2015, 02:48:48 PM
Thanks guys about the calibration information after it's built.  I think I may have to wet my feet with one of the Mutable Instruments Ambika's or Shruthi's before tackling this.  I wouldn't have know about those synths without seeing this thread.  I know MI doesn't make those anymore but a couple places do sell the boards.
Cool stuff

Nimm could you post your findings for shruthi boards?? I would love one of those fellas sometime in the future.

I apologize if this is detracting too much from the original Minimoog topic but here are the requested links.
MI still has a Shruthi kit:  http://shop.mutable-instruments.net/products/shruthi-1-kit

This site has boards for both synths (US supplier):  http://www.laurentidesynthworks.net/

Thank you Nimm. That bottom site is a gem!