Author Topic: 10.27 - Pre-Ordering available  (Read 18677 times)

andersom

  • Diode Destroyer
  • *
  • Posts: 16
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #15 on: October 28, 2011, 01:08:37 AM »
Order placed :) Thanks

juansolo

  • Electron Doctor
  • *****
  • Posts: 4704
  • John - Wakefield, UK
    • View Profile
    • Juan's Gnomepage
Re: 10.27 - Pre-Ordering available
« Reply #16 on: October 28, 2011, 01:36:54 AM »
One thing I forgot to mention in the announcement: The DirtBag and HoneyDripper will run off 9v, however, if you are building the MN3005 version of the DirtBag (v3205 only works at 9v) you will want to use a charge pump and 15v regulator. With the HoneyDripper, I'm re-designing the stock power supply based on experimenting with my build. I found that it sounds best at 12-15v. So, I will recommend a charge pump for that as well. Not a plug to sell more "Road Rages" but some may appreciate having this info in advance!

The Dipthonizer uses an 18v supply in the stock unit and then knocks it down to 10v via Zeners, but I found this to be incredibly inefficient in my build. Using a regulated 12 or 15v supply and a voltage divider instead of the Zeners kept the voltages rock solid under load.

Will be interesting to see how the HoneyDripper compares to my Dipthonizer clone in that respect (which also uses a road rage... They get around those little boards!).
Gnomepage - DIY effects library & stuff in the Stompage bit
“I excite very large doom for days” - playpunk

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9603
  • Brian
    • View Profile
    • madbeanpedals
Re: 10.27 - Pre-Ordering available
« Reply #17 on: October 28, 2011, 04:36:05 AM »
hey brian, are there many slow loris's left? Its gonna be a while until i get back into building

Plenty, ATM.
No matter where you go, there I am. Watching you.

ramengo

  • Diode Destroyer
  • *
  • Posts: 26
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #18 on: October 28, 2011, 07:19:40 AM »
HI,
this is my 1st message..
sorry for my bad english..
i want to know the component of the dirtbag deluxe and the current lover..
because i have to do the order by e-commerce

when i can view the pdf file??

thanks for the reply..

Angelo

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9603
  • Brian
    • View Profile
    • madbeanpedals
Re: 10.27 - Pre-Ordering available
« Reply #19 on: October 28, 2011, 07:23:15 AM »

ramengo, I'll have this available this weekend.
No matter where you go, there I am. Watching you.

ckim715

  • Solder Ninja
  • ****
  • Posts: 266
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #20 on: October 30, 2011, 11:01:15 AM »
What size is the PCB for the dirtbag? Trying to get a couple of the little things like the enclosure taken care of :)
-Charlie

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9603
  • Brian
    • View Profile
    • madbeanpedals
Re: 10.27 - Pre-Ordering available
« Reply #21 on: October 30, 2011, 11:06:09 AM »
The Dirtbag fits into a 1590BB in the vertical orientation  :)

The HoneyDripper and Current Lover require a 125B.
No matter where you go, there I am. Watching you.

tenwatt

  • Solder Ninja
  • ****
  • Posts: 436
  • Jeremy
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #22 on: October 31, 2011, 06:10:31 AM »

ramengo, I'll have this available this weekend.
You're such a tease...  ;)

I've been checking all weekend.  Can't hardly wait.
Not too bright....

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9603
  • Brian
    • View Profile
    • madbeanpedals
Re: 10.27 - Pre-Ordering available
« Reply #23 on: October 31, 2011, 04:26:30 PM »
Here are the BOMs for the Current Lover, Honey Dripper and Dirtbag Deluxe.

The Honey Dripper no longer requires an extra Road Rage board: I was able to incorporate the circuitry onto the a revised layout. The parts needed for the RR portion are included in the HoneyDripper BOM. The Dirtbag still requires a Road Rage IF you are building the MN3005 version. These are not included in the Dirtbag BOM.

« Last Edit: November 01, 2011, 09:37:58 AM by madbean »
No matter where you go, there I am. Watching you.

nzCdog

  • Electron Doctor
  • *****
  • Posts: 3895
  • Corey - Christchurch, NZ
    • View Profile
    • Soundcloud
Re: 10.27 - Pre-Ordering available
« Reply #24 on: October 31, 2011, 04:42:53 PM »
Woah... seeing that Dirtbag board is making me flip out! :o :D
I need a bigger pedalboard!!! :P

Haberdasher

  • Electron Doctor
  • *****
  • Posts: 2908
  • "El Duder-ino"
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #25 on: October 31, 2011, 04:54:54 PM »
Awesome

Is 25V and > good for all the dirtbag caps or should we go with 35V and >?
Are the pots on all three of these pc mount?

Thanks!
Looking for a discontinued madbean board?  Check out my THREAD

FABBED PCB's FOR SALE:
Now carrying Matched JFETS

madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9603
  • Brian
    • View Profile
    • madbeanpedals
Re: 10.27 - Pre-Ordering available
« Reply #26 on: October 31, 2011, 05:20:29 PM »
25v is the most you need. Everything is PCB mounted.
No matter where you go, there I am. Watching you.

thatirishsob

  • Transistor Tickler
  • **
  • Posts: 50
  • Sean O'Bryan
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #27 on: October 31, 2011, 05:38:52 PM »
WOOHOO thanks a lot Brian!!!

djaaz

  • Solder Ninja
  • ****
  • Posts: 366
    • View Profile
Re: 10.27 - Pre-Ordering available
« Reply #28 on: October 31, 2011, 08:10:51 PM »
Looking at the current lover & dirtbag deluxe, is it safe to assume that any cap above 1uf is polarized?


madbean

  • Administrator
  • Electron Doctor
  • *****
  • Posts: 9603
  • Brian
    • View Profile
    • madbeanpedals
Re: 10.27 - Pre-Ordering available
« Reply #29 on: October 31, 2011, 09:26:23 PM »
Looking at the current lover & dirtbag deluxe, is it safe to assume that any cap above 1uf is polarized?



Yes. IIRC, all the 1uFs are polarized, too.
No matter where you go, there I am. Watching you.