Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Leevibe

Pages: [1] 2 3 ... 9
Open Discussion / UAD Luna anyone?
« on: January 24, 2020, 12:49:04 AM »
Has anyone else been following UADís announcement of their new LUNA DAW? I lurked on a couple UAD and Gearslutz threads that mostly devolved into Mac vs PC wars and a lot of angry speculation about its worthlessness.

I have to say that Iím pretty interested in this. I doubt Iím going to stop using LPX any time soon but I can imagine this greatly speeding up tracking and possibly mixing. Thereís more useful info in this Warren Huart video than anything else Iíve seen.

Iím kind of excited about it! I recently started using an Apollo twin MkII duo and Iím on a Mac so Iíll be ready to give it a whirl when they release it. I do wish the Neve summing were free but considering that theyíre offering the whole daw for free Iím not going to complain.

The relevant part of the video starts around 11:00.

Build Reports / Signal Conditioner
« on: January 18, 2020, 08:22:19 PM »
The snappiest name I have for this one would be the ďTurd PolisherĒ but I decided to just call it the ďSignal Conditioner.Ē Itís one Iíve actually been thinking about and planning for a very long time despite the spartan graphics.

This is a really nice gate into a bloviator that I added some fun features to. One of the things Iíve run into with the gate I was using was that if I switched between guitars, like going from a Tele to my P90 guitar I would have to change the threshold setting. On this one I put bypass on a toggle switch since itís not exactly something that gets turned on and off in a set. I then used a stomp switch to toggle between 2 different pots so I can have presets. Each pot has its own LED indicator. I was able to to accomplish it all with only a 3PDT by ganging the pot wipers to pad 2 on the board and only switching lugs 1 & 3. It switches nice with minimal popping.

I used a pair of tip shunting jacks between the circuits so I can individually place them in my chain. Normally I have run a gate near the front of my chain just to kill single coil hum and then a sonic stomp toward the end. I have noticed thereís enough hiss from the bloviator that I may put them both toward the end, just before delay/reverb and have the maximizer before the gate. Weíll see. Itís flexible enough for me to route either one wherever I want.

The knobs, stomp switches and fancy toggle switch dress nut come from BLMS. I'm actually pretty impressed with these compact 3PDTs. They're the cheapies but they have a really nice feel and sound and the solder lugs are nice. I'm sure I'll use them again. The board mounting brackets were drawn in Fusion 360 and printed in bronze PLA. I would normally use PETG but I ran out. I have to admit, it's nice printing in PLA after dealing with the gooeyness of PETG. And it prints so much faster.

To add to the fun, this includes a 10 segment display that functions as a VU meter of sorts. I hung that right off the output and it doesnít switch with bypass so itís always indicating signal strength. It doesnít give me any actual calibrated measurements but itís easy to see signal strength and itís a fun light show. That was a circuit and PCB layout I came up with like 5 years ago and I finally put it into something. I canít even remember fully how I came up with it but it works!

No fancy pics this time and the video and playing are crap. I just balanced my phone on my leg and played my bench guitar through my crappy bench amp to prove that the light show works.

Thanks for looking!

Open Discussion / More love for Smallbear
« on: December 13, 2019, 05:48:36 PM »
From time to time I see someone posting about how Smallbear dropped the ball or their prices are too high. I just want to say that I love Smallbear. I put in an order last week and it showed up yesterday. I always have this experience where I open a parts order and I have stuff I don't remember ordering, so I wasn't too surprised when there were parts I didn't recognize. But then I realized they had shipped me the complete wrong order. Ugh. So, I emailed them today about it. They got back to me immediately and let me know they had already noticed the problem and shipped my order and tracking shows it delivering tomorrow.

I love those guys! I don't care if a company makes mistakes if they are willing to take care of me like that.

Build Reports / Secret Sauce GOLD edition
« on: November 09, 2019, 06:32:08 PM »
The one I built myself got enough favorable reactions that I decided to do a little run of 5 of these. I'm glad I was able to buy these cases before PPP upped the minimum order.

I thought it would be fun to do a couple in gold instead of the chrome look, so, here it is! This uses the same process I used on the original one. It involves laser printing the graphic to acetate, then using a cheap laminator to bond the metallic film to the toner. It gets stuck down to the enclosure using UV cure resin and then ET is poured over the top. It takes patience to get it all to work right but it looks nice. I haven't been able to get a picture yet that can capture the depth and shine but it's really sweet looking.

Stomptown and Jubal81 did the schematic and layout for this. I think it's a really nice board. It features the 1776 Finish Line relay circuit onboard. Thanks for letting me use this Josh. It makes it so sweet! This pedal feels like a community effort. It's great to be part of the MB ecosystem.

Open Discussion / World's biggest pedal board???
« on: September 09, 2019, 01:21:48 PM »
I don't want to be snarky, but how is this the world's biggest pedal board? Wouldn't it rightly be called "most pedalboards strung together?" It's 34 boards, not one board. What am I missing? It's still a fun idea but some poor dude is out there somewhere who really does have the world's largest board. I feel sorry for him whoever he is.

Open Discussion / New on the to-watch list
« on: July 19, 2019, 12:51:24 PM »

Open Discussion / What do you love about pedal building?
« on: June 22, 2019, 09:21:31 PM »
This time of year I'm not able to be too active on the forum or with building because of all the other stuff I have going on. Checking in to post a build report and see what's happening around here feels almost somber. Everybody who has been at this a while seems to be slowing way down or even throwing in the towel. It looks like the flame is burning out.

As has been mentioned, many have built everything there is to build. The novelty has worn off, the way people interact on the internet has morphed. Fashions come and go in the music world as everywhere else. Etc. etc.

Still, there are some essential things about building pedals that don't seem to get old for me. I just wanted to share a few of them and see if anyone else shares some of the same loves. And maybe add to the list. So, in no particular order, here are a few of the things I love about pedal building...

- a shiny solder fillet
- seeing a bypass LED light up for the first time
- a perfect ET pour
- the look and heft of a populated PCB
- parts packages arriving
- just the imagining and planning of a build
- getting boards in from OSHpark
- seeing my artistic vision realized
- hearing a circuit do what it is supposed to do
- feeling certain that is sounds better boxed than when it was being tested. It's similar to the way new shoes made me run faster as a kid or the way washing my car makes it run better.
- the look of a drilled enclosure

There's lots more stuff like that for me. What I'm saying is that much of what I love about this is in the otherwise mundane elements that are somehow satisfying. I'm curious about what those elements are for the rest of us.

Build Reports / JMK/THcustom Epic Looper - with video
« on: June 21, 2019, 06:25:19 PM »
This is my implementation of the venerable JMK/TH Customs Epic Looper. This is such a fantastic loop switcher! Not just a great DIY loop switcher, but great period. It goes as far as you can go in functionality while staying completely simple. And itís so compact! I think everyone should build one. Now, if you want something that goes way beyond epic and space isnít a concern, take a look at Marshall Artsí Eoo3 project. Everyone else, build the Epic Looper.

I went a little off the reservation with this one in terms of making it my own. Here is a list of things I did that strayed from the build report:

- soft touch switches
- separate LEDs for programs/loops (vs bicolor LEDs)
- 7 segment bank display (This actually is an option provided by Jacob and Thomas but itís a little more work to build)
- extensive use of 3D printed parts to get everything to fit and mount. I also used 3D printed drilling guides
- custom printed/cut vinyl graphics by my friend Forest at Dukes Decals.

For more info on how I built it, check out the WIP thread.

Thanks for looking!

Open Discussion / SW Episode IX
« on: April 12, 2019, 11:18:04 AM »
Haters gonna hate, yawners gonna yawn. I don't care. I can't not get excited about a new StarWars movie.

Open Discussion / Fly your Blazer flag at half mast
« on: March 26, 2019, 07:58:02 AM »
Man, this sucks. Sorry, I know this isn't a sports forum but why can't Portland have a successful big guy who doesn't get crippled?

Build Reports / Epic Looper WIP: 6/21 update - FINISHED!
« on: March 23, 2019, 05:10:22 PM »
I got PIF'd a set of boards for this a long time ago and kind of forgot about them. Recently I was thinking about getting a loop switcher and I was trying to find one that would have some programmability but still be easy to use. Anything that would make me need to refer to the manual is right out. I already have that problem with my Timefactor! I realized that I already had the solution sitting in my pile of to-build. I actually really dig the looper Marshall Arts is developing and it looks like a super fun project. I thought about going that direction but this will work better with my needs and setup.

So, as of now, I have the audio and control boards populated and the case is all drilled out and partly stickered up with graphics decals. I'll be using enclosed switchcraft jacks, which I have in hand. I purchased some knockoffs of the alpha DPDT momentaries but I don't like the click so I'm going with soft touch SPDT switches. I also found a really sweet midi jack. So far it's looking like everything is going to fit.

I've been mocking the whole thing up in Fusion 360. I used 3d printed drill templates and an angled little jig to keep my drilling surface perpendicular to the drill bit. Everything is lining up really nice.

Being a bit colorblind I plan to use the 7 segment display instead of the single RGB bank indicator. I'm also splitting the bank and manual LEDs to make it simple for myself. It isn't making the build simple though. I'm working up some printed brackets to hold the LEDs and switch PCBs in place.

7 segment displays can be tough to read if they don't have some kind of filter in front of them, so I found some thin red plastic that I super glued to thin polycarbonate. I over drilled the top and mounted this red lens in to the hole. Then I flowed UV cure resin over that and then cured it with my daughter's nail polish UV light. It worked great. My graphic will cover over the big round hole and will only expose a rectangle so it should look pretty sweet when done.

Open Discussion / NGD
« on: March 13, 2019, 08:43:06 PM »
So, a friend just gave me this guitar! I'm still stunned. I know it's just a studio, but to me it's also two other things: a Gibson and a Les Paul. Two things I've never owned. Anyway, I'm super thankful for it and I'm definitely going to build him something cool as a thank-you.

Open Discussion / Hakko T18-BR02 bent conical tip?
« on: February 14, 2019, 02:13:36 PM »
The tip on my Hakko iron has lost a lot of plating and I'm having trouble getting joints to heat. I've been using a chisel tip but I miss using conical. The bent conical looks like it would be pretty nice. Anyone have any experience with it?


Open Discussion / Hi, my name is Lee and I'm an Arrow abuser
« on: February 11, 2019, 09:06:42 PM »
Arrow Electronics is bonkers in the best possible way. They not only fill ridiculously small orders, they ship it for free in the US and they do it in Steve Jobs approved style.

Open cardboard box to find shiny ESD bag. Open ESD bag to find sweet looking fancy cardboard box. What could be inside? An iPod? A Nest thermostat? Nope. a DIP socket. Some caps. Decadent.

How to feel about this? On the one hand I feel like I should be sharing about this here so that other people patronize them and take advantage of the amazing service and selection. You know, drive business their way. On the other hand, I'm afraid they will get ticked off and the golden era will end. When I was in high school on a band trip I remember we were all at this bowling alley and someone figured out the change machine was broken. You put in a buck and got 5 quarters out. Some of my friends made some quick bucks. Then there was a crowd. Then it was all over. This feels like that.

The achilles heel of Arrow is their crap search engine. The workaround is to find the part you want on Mouser, grab the manufacturer (not Mouser) part number, paste it into the search box on Arrow. I've been able to locate a surprising number of very specific parts this way. I'm working on populating boards for a JMK looper. I just used Jacob's BOM to grab part numbers from Mouser and Bob's your uncle. Lots of shiny bags and fancy boxes.

Open Discussion / Ultimate GW score. Wish it were mine
« on: January 26, 2019, 12:45:10 PM »
Up in the Pacific Northwest, Goodwill has figured out that anything of particular value can be auctioned off for much more than what stuff sells for out on the floor of their stores. Apparently down in Arizona that isn't the case. My good friend had been spending some time down there and popped onto a Goodwill. He found this JC120 with a $100 price tag on it. When he got up to the front counter, the lady said, "You know that's not the true price, right?" He was disappointed but he knew that it would still be worth significantly more so he was prepared to pay whatever they were asking. Then she said, "Yeah, everything with that color of tag is 20% off today." So, he got this beauty for $80. No fair, right?

He got back into the Portland area yesterday so he brought it over to check out. It wasn't really working right initially but a few shots of deoxit on the pots and switches brought everything into perfect working order. It's really an amazing amp. I did a little of teh google yesterday and it looks like it's from the mid '80s. Cool!!

I hear people say all the time that they hate chorus. I get it. When not used tastefully it can be downright hideous, but when it's good, it's SO good! I defy anyone to plug into this, kick in the chorus circuit, and not like it. Your pride might make you say you hate chorus but your heart would be screaming "LIAR!!"

Pages: [1] 2 3 ... 9