Messages

1

General Questions / Aion Blueshift opamps

« on: July 29, 2023, 06:37:10 AM »

So I recently started on a second Aion Blueshift build and was in the process of drawing up a shopping list when I noticed that it calls for OPA2134s for the input buffer and pre and post filters, although the build docs do note that a TL072 will work fine (as will any other standard dual opamp most likely). Now the OPA2134 is certainly a fine opamp, but is it worth it here? The original Boss DC-2 definitely didn't use them and people seem to like them just fine, and I'd rather not spend $5-6 per chip when a sub-$1 part will work just as well. Is the lower noise floor and "clarity" that audiophiles rave about really worth an additional $8-10 in a guitar application? Interested in hearing everyone's thoughts.

2

Open Discussion / Re: New Lovetone project PCBs

« on: June 04, 2023, 09:41:16 PM »

I’ve been about halfway through an AlanP for about 2 years now. Looking forward to finishing it one day.


Sent from my iPhone using Tapatalk

Would you happen to have the build docs handy? I got a set of his boards a few years ago and never got around to building it after the Dead End FX version came out, but now that I'm looking to optimize pedalboard space I'd kind of like to revisit it.

Found them!

https://www.dropbox.com/s/kw5q5dye7slw946/NNFLITE%20build%20doc%201.0.pdf?dl=0

Awesome, thank you so much! Now I just need to decide whether I'd rather go with a vertically or horizontally oriented 150xx to decide which version to build. Hell, maybe I'll just do both lol

3

Open Discussion / Re: New Lovetone project PCBs

« on: June 04, 2023, 12:00:51 AM »

I’ve been about halfway through an AlanP for about 2 years now. Looking forward to finishing it one day.


Sent from my iPhone using Tapatalk

Would you happen to have the build docs handy? I got a set of his boards a few years ago and never got around to building it after the Dead End FX version came out, but now that I'm looking to optimize pedalboard space I'd kind of like to revisit it.

4

Open Discussion / Re: New Lovetone project PCBs

« on: May 31, 2023, 01:36:26 AM »

Just to let everyone know, the Flanger? and Ring Stinger are out as of the 19th May
I had a small hand in these and can say they are an engineering marvel

Enjoy
https://aionfx.com/news/theyre-here-two-new-lovetone-projects-based-on-the-flange-with-no-name-and-ring-stinger/

Awesome! I built the Dead End FX version of the Flange With No Name and while I love the way it sounds it certainly is rather bulky in its 1590D enclosure and takes up a lot of real estate on my pedalboard so a smaller version is right up my alley. I'll certainly be checking them out!

5

General Questions / Removing powdercoat from the inside of Tayda enclosures

« on: May 05, 2023, 01:38:22 AM »

It goes without saying that Tayda's drilling, powdercoating, and UV printing options were a game changer for the DIY pedal scene, and now that I've figured out Illustrator I have been taking full advantage of it. While I don't have many real complaints, I have noticed that quite a bit of powdercoat tends to end up on the inside of their enclosures, particularly around any drill holes, which poses a bit of an issue when it comes to establishing electrical connectivity at the input jack for shielding. How are you all getting around this? So far I've just been sanding/filing away the excess powdercoating around the input jack hole but it's kind of a tedious and time-consuming operation, especially when dealing with multiple enclosures at once. If any of you have discovered a better method I'd love to hear it!

6

Build Reports / Re: FIEND | Effects Layouts Horde Howler

« on: April 25, 2023, 09:47:17 PM »

Man, you have been knocking it out of the park with these New Vegas themed pedals! That thing looks amazing! I particularly love what you did with the mismatched/aged knobs, it really fits with the chaotic nature of the fiends. I can't wait to see what you cook up next!

7

Build Reports / Re: ZION | Effects Layouts Sonorus

« on: April 21, 2023, 01:06:48 AM »

...so does this mean we're gonna get pedals for Dead Money, Old World Blues, and Lonesome Road too?

Seriously though, that thing looks amazing, and is a fitting tribute to one of the most badass mf'ers to ever walk the wastes. Well done!

8

Open Discussion / Re: NGD - Been awhile

« on: April 07, 2023, 02:31:21 AM »

Nice! I sold my 8 string Agile for a black one of these a few months ago to do the whole Loathe thing and haven't looked back since! Kinda wish I would've shelled out the extra cash for one of the CME exclusive ones though, their unique colors and matching painted headstocks really pop. I definitely agree that fit and finish is quite nice for a guitar which costs $500 brand new and it dooms quite well even with the stock single coils, although mine are a bit microphonic so I'll probably end up replacing them with something better (like P90s) in the near future. The Staytrem is on my list as well, as the stock bridge is definitely a bit mediocre if you're tuning low. Better tuners would also be worth looking into, I'm definitely not a huge fan of the stock ones. Overall it's still a nice instrument though and it's awesome to see someone else with one!

9

Open Discussion / Re: Am I just a gullible rube…? why am I questioning this

« on: April 02, 2023, 04:27:53 AM »

Emily and Josh are top-tier trolls   

10

Open Discussion / Re: NP/BP Electrolytic Caps

« on: March 13, 2023, 11:59:53 PM »

Yeah I noticed that the other day when I was placing an order. Looking into it further, it's not just their bipolar caps either; Nichicon seems to be discontinuing most if not all of their 5x11, 6.3x11, and 6.3x15 electrolytic capacitors due to "decreased order volume and product obsolescence". This is a real bummer, as they were always my go-to electrolytic capacitor brand alongside Panasonic. Here's hoping they don't end up following suit...

11

Open Discussion / Re: Janky Tape Echo - DIY tape echo project

« on: March 11, 2023, 03:30:27 AM »

This is epic! I'd definitely be willing to attempt it if I ever decide to get a 3D Printer.

12

Open Discussion / Re: Has Smallbear shipping got even slower?

« on: February 21, 2023, 11:08:35 PM »

I can't say I've noticed any issues, all my recent orders have shipped within a few days. Maybe try shooting them an email to see what's up?

13

Build Reports / Re: MXR x MadBeanPedals Setback Analog Delay

« on: January 17, 2023, 12:44:24 AM »

  I wonder why Xvive doesn't try and do a Recticon reissue?  Maybe a patent thing.  It would put some awesome flangers back into the wild if they did.

Aside from possible IP issues, from what I understand the major hurdle is that the Reticon chips were manufactured using an obsolete process for which production tooling no longer exists, thus making any attempt at recreating them prohibitively expensive due to the need to build a whole new production line.

14

Build Reports / Re: Aion Blueshift

« on: January 03, 2023, 04:48:21 AM »

Damn, that is clean. Your wiring looks my Blueshift look amateurish by comparison, and your graphics are top-notch as always. Fantastic work!

15

Open Discussion / Re: Silent True Bypass Relay Switching, VFE Indiegogo Campaign for PIC MCU Code

« on: December 30, 2022, 02:39:27 AM »

I threw my $25 in. Wish I could have contributed more, but funds are a little tight right after Christmas!