Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - pedalman

Pages: [1] 2 3
VFE Projects / Relay question
« on: March 26, 2019, 11:24:06 PM »
I had a few of these laying around. Will they work on the pinball ?

Open Discussion / Could be interesting
« on: March 23, 2019, 10:57:33 AM »
This could be interesting

VFE Projects / Pinball question
« on: March 16, 2019, 02:25:51 PM »
I want to build a pinball so it can be used as it was designed. But was wondering if I could add a loop as well. Let's say I want to modify only a big buff in a petalboard arrangement. Should the loop be on the eq, or the muff?

Open Discussion / Plexiglass
« on: March 14, 2019, 02:17:23 PM »
I've seen plexiglass spacers on some of the enclosures (under the lid)
Does somebody make these, or are they a custom made thing?

Open Discussion / Fart'n around at the bench
« on: March 08, 2019, 02:24:12 AM »
I was trying out some new printer paper for enclosure etching. Turned out a huge failure, but I had all the gear out for messing around with salt solution so I started playing around with that like a mad scientist with a arc welder

Test 1 was a 6v battery and that was a joke (slight fog)

Test 2 I snapped 2, 9v's together and hit it. This time i masked off a area to see a definite line

At this point I was ready to clean up and go towards a copper sulphate solution tomorrow.
I look over and see soy sauce on the counter.  Hmmm

Test 3, 18v & soy sauce. Believe it or not, it had the best reaction so far and a little quicker.

Tomorrow the copper sulphate comes out along with bench power

General Questions / Cool tool
« on: March 07, 2019, 07:06:07 PM »
YouTube it

General Questions / Struck gold
« on: March 07, 2019, 06:59:36 PM »
I gave up on pedal building about 6 years ago due to moving. I'm slowly getting back into it. Today I was cleaning the shed and came across a box that had 14 pcb's and 3 unopened orders from tayda !
Woo hooo!

Open Discussion / Tayda PCB's
« on: January 10, 2014, 09:10:48 PM »
Anybody ever try Tayda pcbs ? Box of rock, plexi & super hard on caught my eye. Any info would be appreciated

Open Discussion / old school
« on: January 10, 2014, 08:40:00 PM »

Open Discussion / Amp Cab
« on: January 02, 2014, 01:19:10 PM »
Anybody ever try building a 4x8 cab ? I was thinking about this when I seen the Celestion eight 15's
Might be a cool little match for the tiny giant

Open Discussion / Just Posted
« on: December 19, 2013, 05:14:58 PM »
Just went up on FB !!!

Open Discussion / Marshall JCM 2000
« on: December 17, 2013, 01:29:18 AM »
Went in to a pawn shop today to test drive a Pro Jr. All of a sudden a Marshall JCM 2000 DSL 401 comes out on the sales floor. I thought no way is this thing in my price range. Started talking to the guy and he said it had a couple of bad tubes in it. Said I could have it for $200 After a little talking and haggling I walked out with it for $125 ! Tube shopping time  : )

Open Discussion / cap question
« on: December 16, 2013, 12:24:02 AM »
I have a recipe to mod a DS-1 in the parts list it calls for capasitors of assorted varietys with the little backwards "u"
one of the parts calls for a 1UF (capitol U). is this a type error or does this have a different value?

Open Discussion / OD
« on: November 21, 2013, 08:42:02 PM »
Recommend a good OD to mate up with my Mudbunny for that sweet, sweet Gilmour tone.
Anybody have a PCB for a Tube Works clone?

Open Discussion / Crazy Question
« on: November 21, 2013, 05:35:33 PM »
I ordered some Epiphone 57 pickups for a mod im doing. I assume the Gibson wire color code is the same as Epis. So when the pickups came I went to the ole Seymour web page and it says red/white  green/black so I pull out the dmm and it was a no go. after a while I realize that these are red/green  black/white. seeing that these have the covers on its VERY hard to test for polarity with the screwdriver trick. Any ideas ???

Question #2
I bought this cool coil filter mod
It calls for both screw poles to be in the south position. This kind of breaks the Gibson rule of one north and one south.
Do you think I will have any problems with these pickups? Maybe I should just go to walmart and buy a cheap compass

Pages: [1] 2 3