Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - aziltz

Pages: [1] 2 3 ... 19
1
Hi All,

I sell a few PCB projects through my commercial website, as well as post tech-related blog articles. Check them out here.  Cheers!

Austin

2
Open Discussion / Re: Anyone with Electrical Engineering degrees?
« on: January 16, 2014, 07:56:09 PM »
i'm a physicist, about 6months away from my PhD.  You get a lot of experience with electronics working in experimental physics.

3
Tech Help - Projects Page / Re: Adding a Micro Buffer to a EB Volume pedal
« on: September 24, 2013, 08:02:00 PM »
Hey Brian,

It would be best to put a volume knob on the output.  Out from PCB to lug 3 of volume pot.  Lug 1 to ground and Lug 2 would go to the output jack hot.

For any other specific questions, feel free to contact me directly at sales@coldcrafteffects.net

Austin

edit: just noticed you are talking about the EB volume pedal.  I would separate the connection from the input jack to lug 3, and put the buffer in there, between input jack and pot.

4
Open Discussion / Re: PPP Screenprinting just got cheaper!
« on: May 20, 2013, 08:08:38 PM »
here's an example of their old-style screening.  I had my screen made just before they announced the new printer.


5
Open Discussion / Re: Pedal Parts Plus Colors
« on: May 20, 2013, 08:07:35 PM »
Galaxy Purple with Black Silkscreen (hand-screened, not machine printed)


6
Open Discussion / Re: PPP Screenprinting just got cheaper!
« on: May 03, 2013, 08:07:24 AM »
 I hope it gets resolved.

7
Open Discussion / Re: PPP Screenprinting just got cheaper!
« on: May 02, 2013, 09:17:12 AM »
pictures?  I just had traditional screening done by them, and was thinking of sending some unprinted boxes back for machine-printing.

8
Open Discussion / Re: PPP Screenprinting just got cheaper!
« on: May 01, 2013, 11:06:11 AM »
the new Mojohand Rook Royale doesn't seem to have problems with the printing coming off.

9
Open Discussion / Re: Zero Point Breakout Board
« on: April 26, 2013, 08:50:41 PM »
I got myself a few of those switches off mouser.  do you know of a eagle component that matches it?

10
Open Discussion / Re: Circuits to cure cancer benefit
« on: April 26, 2013, 08:41:30 PM »
if ya'll are interested in my wares, this is up for grabs before its even been released. 

http://www.ebay.com/itm/Coldcraft-Effects-Cascade-MKII-002-Circuits-Cure-Cancer-/281094048120

11
Open Discussion / Re: Circuits to cure cancer benefit
« on: April 10, 2013, 10:12:41 AM »
i'll be donating something for sure.  not sure what yet, hope to figure it out tonight.

12
Open Discussion / Re: PPP Screenprinting just got cheaper!
« on: April 04, 2013, 06:04:30 PM »
a month after I paid for my first screen!

13
Open Discussion / Re: Zero Point Breakout Board
« on: March 19, 2013, 12:29:32 PM »
great thanks for the 'splaining and the link.

14
Open Discussion / Zero Point Breakout Board
« on: March 19, 2013, 10:11:08 AM »
Brian, could you share how you created the breakout board for the ZPSDX and anything you would do differently in the future?

Thanks,

15
Open Discussion / Bulk-ish Solder
« on: March 03, 2013, 07:48:55 AM »
Hey Y'all, I need a US source for solder in packaging larger than Radioschack.  I prefer Silver Bearing 62/36/2, but if you have other suggestions, I am open to it.  Where do you get yours?

Pages: [1] 2 3 ... 19